NVIDIA Jetson Nano T130 mSATA SSD Shield Storage Expansion Board

[Overview]
This T130 is an mSATA SSD storage expansion board designed for NVIDIA Jetson nano developer kit, it supports up to 2TB mSATA solid-state drive (SSD), allowing you to expand your storage with high-speed SSD drives on NVIDIA Jetson nano developer kit.
Now it is time to build a mobile hard disk with a mSATA SSD for your Jetson Nano.

How to boot the rootfs from external drive: https://www.jetsonhacks.com/2019/04/25/jetson-nano-run-on-usb-drive/

[WiKi for reference] raspberrypiwiki.com/T130


[Key Features]

• For use with: Jetson Nano
• Operating System: All operating systems
• Ideal storage solution for Jetson Nano - mSATA SSD Shield
• Supports up to 2TB mSATA solid-state drive (SSD)
• Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
• USB3.1 Gen1 connectivity offers plug-and-play functionality on your Jetson Nano
• With SSD LED blue indicator
• On-board DC jack allows external power supply for high capacity SSD
• PCB Size 100mm x 80mm

[Power Supply Requirement]

• Power supply via DC jack : 5VDC ±5%.

[I/O PORTS]

• USB Type-A socket x 1
• DC Jack 5.5x2.1mm x 1
• 26Pin SATA socket x 1

[Matching Metal Case]

• So far there is no matching case for Jetson Nano & T130 mSATA SSD Shield, but we will consider to make it.

[Packing List]

Only T130 Board

• 1x T130 mSATA SSD Shield
• 1x USB 3.1 Jumper
• 4x Spacer F/F M2.5 x 12mm
• 10x Screw M2.5 x5mm

T130+PSU

• 1x T130 mSATA SSD Shield
• 1x USB 3.1 Jumper
• 4x Spacer F/F M2.5 x 12mm
• 10x Screw M2.5 x5mm
• 1x  DC 5V 4A Power Supply with EU&US Plug(Please leave a note it you need UK plug)

Note: The Jetson Nano board is not included in the packing list.