The MAX^® 10 FPGA Evaluation Kit is intended as a "no frills", entry-level board for evaluation of the Intel® MAX 10 FPGA technology.

• Ordering Information
• Evaluation Kit Contents
• Documentation
• Related Links

With this evaluation board, you can:

• Develop designs for the 10M08S, 144-EQFP FPGA
• Measure FPGA power (VCC_CORE and VCC_IO)
• Bridge between different I/O voltages (adjustable VCC_IO on Bank 8)
• Read and write to the FPGA’s NOR flash memory
• Use the FPGA’s analog-to-digital converter embedded block to measure incoming analog signals
• Interface to external functions or devices via Arduino UNO R3 connectors or through-hole vias
• Reuse the kit’s PCB board and schematic as a model for your design

Evaluation Kit Contents

The MAX 10 FPGA – 10M08 Evaluation Kit includes the following:

• CE-compliant MAX 10 evaluation board
  • MAX 10 FPGA (10M08, single power supply, 144-pin EQFP)
  • Intel Enpirion^® EP5388QI point-of-load, 800 mA, DC-DC step-down (buck) converter with an integrated inductor
  • JTAG header for download cable programming (POF) or configuration (SOF)
  • 50 MHz single-ended, external oscillator clock source
  • Shunt resistors and probe points to measure FPGA power
  • Switch, push buttons, jumpers, and status LEDs
  • Connectors:
    • Arduino headers to accept UNO R3 compatible Shields
    • General-purpose through-hole vias
    • Type mini-B USB connector (power source)
      • USB cable included
    • Footprint to install a potentiometer (customer must purchase and install)
• Free Intel Quartus® Prime Lite Edition software (download and license from website)
• Complete documentation
  • User manual, bill of materials, schematic, and board files