FULL

Full Specs

	Processor	Freescale™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
	Memory	512MB (Basic) or 1GB (only Extended and Full)
	Graphics	Integrated 2d/3d graphics controller
	Video Out	Micro HDMI interface LVDS interface + touch (I2C signals)
	Video In	Analog camera connection supporting NTSC and PAL 8-bit parallel camera interface*
	Mass Storage	MicroSD card slot onboard 8-bit SDIO interface*
	Audio	HDMI audio transmitter S/PIDF & I2S*
	USB	1x USB 2.0 Type A ports 1x USB OTG (micro-AB connector)
	Networking	Fast ethernet RJ45 – 10/100Mbps (only Basic and Full) Wi-Fi 802.11 b/g/n,Direct Mode SmartConfig and Bluetooth 4.0 Low Energy (only Extended and Full)
	Serial Ports	3x UART ports* 2x CAN Bus interfaces*
	Other Interfaces	8x PWM signals* 3x I2C interface* 1x SPI interface* 6x multiplexable signals*
	Power Supply	5 V DC Micro USB 6-15 V DC Power Jack RTC Battery Connector
	LEDs	Green Power Status LED User Configurable LEDs (Red and Orange)
	Integrated Sensors	3-Axis Accelerometer (only Extended and Full) 3-Axis Magnetometer (only Extended and Full) 3-Axis Digital Gyroscope (only Extended and Full) 1x Sensor Snap-In I2C connector (only Extended and Full)
	Dimensions	89mm x59mm (3.50″ x 2.32″)
	Arduino Pinout	Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields.
	Digital I/O Pins	32 extended GPIOs (A9 dedicated) 22 arduino GPIOs (M4 dedicated)
	Analog Input Pins	6 available Pins
	Operating System	Android Lollipop & Linux UDOObuntu2 (14.04 LTS)

*Available on Pin Header

Heterogeneous Processor

Powerful 1GHz Cortex-A9 + M4 I/O realtime co-processor

Born To Be Wireless

Wi-Fi 802.11 b/g/n
Bluetooth 4.0

Made For Sensing The World

Integrated Tracking System. 3-Axis Accelerometer, Magnetometer and Digital Gyroscope

SOFTWARE

UDOObuntu 2

Official UDOO Distribution lubuntu 14.04 LTS armHF based. Download it here

Android