STM32L151C8T6A IC MCU 32BIT 64KB FLASH 48LQFP

The ultra-low-power STM32L151x6/8/B-A and STM32L152x6/8/B-A devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance ARM^® Cortex^®-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 128 Kbytes and RAM up to 32 Kbytes) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

All the devices offer a 12-bit ADC, 2 DACs and 2 ultra-low-power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L151x6/8/B-A and STM32L152x6/8/B-A devices contain standard and advanced communication interfaces: up to two I²Cs and SPIs, three USARTs and a USB. The STM32L151x6/8/B-A and STM32L152x6/8/B-A devices offer up to 20 capacitive sensing channels to simply add touch sensing functionality to any application.

They also include a real-time clock with sub-second counting and a set of backup registers that remain powered in Standby mode.

Finally, the integrated LCD controller (except STM32L151x6/8/B-A devices) has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage.

The ultra-low-power STM32L151x6/8/B-A and STM32L152x6/8/B-A devices operate from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +85 °C and -40 to +105°C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.

Key Features

• Ultra-low-power platform
  • 1.65 V to 3.6 V power supply
  • -40 °C to 105 °C temperature range
  • -40°C to 105°C temperature range
  • 0.28 µA Standby mode (3 wakeup pins)
  • 1.11 µA Standby mode + RTC
  • 0.44 µA Stop mode (16 wakeup lines)
  • 1.38 µA Stop mode + RTC
  • 10.9 µA Low-power Run mode
  • 185 µA/MHz Run mode
  • 10 nA ultra-low I/O leakage
  • 8 µs wakeup time
• Core: ARM^® Cortex^®-M3 32-bit CPU
  • From 32 kHz up to 32 MHz max
  • 1.25 DMIPS/MHz (Dhrystone 2.1)
  • Memory protection unit
• Reset and supply management
  • Ultra-safe, low-power BOR (brownout reset) with 5 selectable thresholds
  • Ultra-low-power POR/PDR
  • Programmable voltage detector (PVD)
• Clock sources
  • 1 to 24 MHz crystal oscillator
  • 32 kHz oscillator for RTC with calibration
  • High Speed Internal 16 MHz factory-trimmed RC (+/- 1%)
  • Internal low-power 37 kHz RC
  • Internal multispeed low-power 65 kHz to 4.2 MHz
  • PLL for CPU clock and USB (48 MHz)
• Pre-programmed bootloader
  • USART supported
• Development support
  • Serial wire debug supported
  • JTAG and trace supported
• Up to 83 fast I/Os (73 I/Os 5V tolerant), all mappable on 16 external interrupt vectors
• Memories
  • Up to 128 Kbytes Flash memory with ECC
  • Up to 32 Kbytes RAM
  • Up to 4 Kbytes of true EEPROM with ECC
  • 80-byte backup register
• LCD Driver (except STM32L151x6/8/B-A devices) for up to 8x40 segments
  • Support contrast adjustment
  • Support blinking mode
  • Step-up converter on board
• Rich analog peripherals (down to 1.8 V)
  • 12-bit ADC 1 Msps up to 24 channels
  • 12-bit DAC 2 channels with output buffers
  • 2x ultra-low-power-comparators(window mode and wake up capability)
• DMA controller 7x channels
• 8x peripheral communication interfaces
  • 1x USB 2.0 (internal 48 MHz PLL)
  • 3x USART (ISO 7816, IrDA)
  • 2x SPI 16 Mbits/s
  • 2x I2C (SMBus/PMBus)
• 10x timers: 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers (independent and window)
• Up to 20 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
• CRC calculation unit, 96-bit unique ID

Circuit Diagram

Documents & Media

Product Attributes	Select All
Categories	Integrated Circuits (ICs)
	Embedded - Microcontrollers
Manufacturer	STMicroelectronics
Series	STM32L1
Packaging	Tray
Part Status	Active
Core Processor	ARM® Cortex®-M3
Core Size	32-Bit
Speed	32MHz
Connectivity	I²C, IrDA, LINbus, SPI, UART/USART, USB
Peripherals	Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
Number of I/O	37
Program Memory Size	64KB (64K x 8)
Program Memory Type	FLASH
EEPROM Size	4K x 8
RAM Size	10K x 8
Voltage - Supply (Vcc/Vdd)	1.8 V ~ 3.6 V
Data Converters	A/D 16x12b, D/A 2x12b
Oscillator Type	Internal
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	48-LQFP
Supplier Device Package	48-LQFP (7x7)