Yamaichi IC Test & Burn-In Socket With A Simple Board, Specifically Designed For STM32 Microcontroller In QFP100(0.5mm Pitch) Package
STM32 microcontroller in QFP100(0.5mm pitch) package with compatible pinouts:
Config the onboard "Device selection jumpers" according to the device to be programmed.
Unit: mm
Part Number | Pitch | Pins | Applicable IC Dimensions (REF.) | Outside Dimensions (REF.) | |||
---|---|---|---|---|---|---|---|
A x B | C x D | E | F | G x H | |||
IC51-1004-809 | 0.5 | 100 | 14 × 14 | 16 × 16 | 15.3 | - | 39 × 39 |
The STM32-QFP100 houses JTAG/SWD headers for connecting a programmer. The connector layout is shown in the figure 1 below.
Figure 1. JTAG/SWD connector layout
Depending on the used pin configuration, the Flash memory, system memory or SRAM is selected as the boot space, as shown in Table 1 below.
Development resources:schematic, etc.
Wiki: www.waveshare.com/wiki/STM32-QFP100
Điện tử ProE cung cấp linh kiện điện tử, thiết bị điện tử , linh kiện IoT chính hãng. ProE cung cấp dịch vụ đặt hàng linh kiện điện tử, thiết bị điện tử chính hãng theo yêu cầu cụ thể của khách hàng. Liên hệ : contact@proe.vn, SĐT: 0938946849
Website: www.proe.vn
Diễn đàn: https://www.facebook.com/groups/278263459284765/
Youtube Chanel: ProE Youtube
Facebook: ProE Facebook