Raspberry Pi Zero WH Package F, with UPS Module and 1.3inch LCD Display

PACKAGE CONTENT

Weight: 0.085 kg

1. Raspberry Pi Zero WH x1
2. UPS HAT (C) x1
3. 1000mAh Li-po battery x1
4. 1.3inch LCD HAT x1
5. Black acrylic protection panels x1
6. Screws pack x1

1

2

3

4

5

6

Raspberry Pi Zero WH Together With UPS Module And 1.3inch LCD Display

UPS & Display Combination

Based on Raspberry Pi Zero WH

What's Included

Product Features

This is a UPS & Display combination package of choice based on Raspberry Pi Zero WH, which consists of Raspberry Pi Zero WH host controller, UPS (Uninterruptible Power Supply), 1.3inch IPS LCD display, as well as rich development resources. It is a ready-to-use kit, so you shouldn't have any trouble on the compatibility, just enjoy the display-related programming of Raspberry Pi.

Raspberry Pi Zero WH features:

• Broadcom BCM2835, 1GHz ARM11 single-core processor
• 512MB RAM
• 802.11 b/g/n WiFi wireless LAN
• Bluetooth Low Energy 4.1 (BLE)
• 40PIN pre-soldered GPIO headers
• Micro SD card slot
• Mini-HDMI port (1080p 60fps video output)
• Micro-USB power
• Micro-USB OTG port
• more details...

1.3inch-LCD-HAT features:

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
• IPS screen, wide viewing angle, better display
• High definition in small size
• 1x joystick, 3x pushbuttons, handy and useful
• more details...

UPS HAT (C) features:

• Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards
• Li-po battery recharge chip, with dynamic path management, more stable power supply
• Voltage boost chip, providing regulated 5V power output
• I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
• Multi battery protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable
• Recharging indicator for monitoring the battery operating status
• more details...

Uninterruptible Power

It is able to recharge the battery and provide power output at the same time from external power supply
Automatically switch over to battery output if external power supply is unavailable, keeps the system running without any trouble

* a Micro SD card is required for this operation, which should be purchased separately.

Pogo Pin Connector For UPS

Supports Raspberry Pi Zero Series (Pinheader Should Be Soldered),
Allows Attaching Other HATs On The Top

Real Time Monitoring

Monitoring The Battery Voltage, Current, Power, And Remaining Capacity Via I2C

When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss

Outline Dimensions

Resources & Services

WIKI: Raspberry_Pi_Zero_WH_Package_F