Raspberry Pi Pico Basic Kit, MicroPython Programming Learning Kit

PACKAGE CONTENT

Weight: 0.404 kg

1. Raspberry Pi Pico with pre-soldered header x1
2. Breadboard x1
3. 1*3PIN yellow pin header x1
4. USB-A to micro-B cable x1
5. PIR sensor x2
6. Breadboard wires x1
7. Single-joint potentiometer x1
8. 8-Bit WS2812 RGB LED x1
9. Round button x3
10. Alarm x1
11. 330R resistor x10
12. 5mm LED x6
13. LCD1602 RGB Module x1
14. Jumper wire female-female 10PIN x1
15. Jumper wire male-female 10PIN x1
16. Plastic storage box x1

Raspberry Pi Pico Basic Kit, MicroPython Programming Learning Kit

Raspberry Pi Pico Basic Kit

Basic entry-level kit prepared for Pico

Tested And Selected By Professional Engineer, With Rich Tutorials And Resources
Fast Getting Started With Raspberry Pi Pico And MicroPython Programming

What's In The Kit

Raspberry Pi Pico With Pre-Soldered Header

A Low-Cost, High-Performance Microcontroller Board With Flexible Digital Interfaces

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 x12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support

Resources & Services

Wiki: Raspberry_Pi_Pico