SX1262 LoRa Node Module for Raspberry Pi Pico, LoRaWAN, Choice Of Frequency Band

  • Mã sản phẩm: Pico-LoRa-SX1262-915M
  • Nhà sản xuất: Waveshare
  • Website hỗ trợ: https://www.proe.vn
480.000₫
PACKAGE CONTENT

Weight: 0.033 kg

  1. Pico-LoRa-SX1262-868M x1
  2. 3.7V 600mAh Li-po battery x1
  3. Antenna 2DB 868mhz x1
  4. IPEX1 to SMA wire x1

1

2

3

4

 

SX1262 LoRa Node Module For Raspberry Pi Pico, LoRaWAN Protocol Support, Choice Of Frequency Band

SX1262 LoRa Node Module For Pico

LoRaWAN Protocol Support

Features At A Glance

The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing problem between transmission distance, interference immunity, and power consumption that traditional solutions aren't able to deal with.

It supports LoRaWAN protocol, which allows it to connect the TTN, ChirpStack servers through a LoRa gateway to use LoRa Cloud service fast and easily.

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
  • Supports LoRaWAN protocol, different frequency bands are available
  • Adopts active temperature compensation crystal oscillator, ensuring stable long-term operating in extreme high/low temperature conditions
  • Supports FSK, GFSK, LoRa modulations, outstanding block resistance and ultra long communication distance
  • PH1.25 battery header and recharge controller, allows connecting rechargeable Lithium battery
  • High receiving sensitivity (up to -148dBm), programmable emitting power (up to 22dBm)
  • Supports preamble detection, with CRC, up to 256 bytes data packet engine
  • Comes with development resources and manual (example in C)

Specifications

FREQUENCY BAND 433M
(410~525MHZ)
868M
(863~870MHZ)
915M
(902~930MHZ)
RFID SX1262
Emiting power 22dBm
Emiting current 107mA@22dBm 118mA@22dBm
Receiving current 5.3mA@125KHz
Modulation LoRa/(G)FSK
Operating voltage 3.3V
Communication bus SPI
Operating temperature -40 ~ 85℃
Dimensions 21.00 × 52.00mm

Raspberry Pi Pico Header Compatibility

Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico

Raspberry Pi Pico is NOT included.

What's On Board

  1. Raspberry Pi Pico header
  2. Status indicators
    PWR: power indicator
    CHG: recharge indicator
  3. RF switch control
    A: controlled by high level
    B: controlled by GPIO22

 

  1. MCP73831 recharge IC
  2. SX1262 module
  3. IPEX 1 antenna connector
  4. Power switch
  5. PH1.25 battery header

Pinout Definition

Application Examples

Industrial Control, Intelligent Home, And Data Acquisition...

Outline Dimensions

Resources & Services

Wiki: Pico-LoRa-SX1262

Xem thêm Thu gọn

Điện tử ProE cung cấp linh kiện điện tử, thiết bị điện tử , linh kiện IoT chính hãng. ProE cung cấp dịch vụ đặt hàng linh kiện điện tử, thiết bị điện tử chính hãng theo yêu cầu cụ thể của khách hàng. Liên hệ : contact@proe.vn, SĐT: 0938946849
Website: www.proe.vn
Diễn đàn: https://www.facebook.com/groups/278263459284765/
Youtube Chanel: ProE Youtube
Facebook: ProE Facebook

Sản phẩm vừa xem

popup

Số lượng:

Tổng tiền:

Giỏ hàng( Sản phẩm)

0938946849